Automatic Outboard Flushing System header

U.S. Patent No. 9,517,495

Order Online
Order Online

Choose from 2, 3, 4, and 5 engine
setup in 12 volt.

Product Sheet or Manual

Find Florida Installers

Contact installers directly.

flushing system boat diagram
  Built-In Solution To Make Flushing A Breeze

Break Through The Hassle

Each outboard engine can require 5-15 minutes of flushing, and for multiple engines, that adds to up to cumbersome labor to "rinse & repeat." The Reverso Outboard Flushing System is a built-in solution to systematically cycle each engine and shutoff when complete.

Eliminate the necessity to connect the hose to every engine.

The system has a single water inlet connection. It is permanently installed and connected to each engine's flushing port.

Automate the flushing maintenance.

After the single hose connection, press the start button, and the system will deliver water to each engine–one at a time. Once the last engine is flushed, the system shuts off and the hose can be disconnected.

Reduce the time it takes to put the boat away after a day on the water.

The built-in system eliminates the hose hassle and boat climbing, and ensures the full flushing gets done (required by all engine manufacturers).


Features and Options

  image of Automatic Outboard Flushing System

Automatic Outboard Flushing System

Version 1.5 available for 2, 3, 4, and 5 engine setups in 12V. Includes 3' inlet hose kit.

  system with optional inlet hose kit and remote switch kit

Optional Remote Switch Kit

To mount a remote switch in an easy-to-access area. Length of cable provided is available in 3, 6, 9, 12, 15, and 18 feet.

  system with optional inlet hose kit

Optional Inlet Hose Kit

To mount a remote hose connection elsewhere (does include the remote hose connection) or to allow a comfortable reach when connecting freshwater hose to the system. Connection on the hose is a female garden hose. Lengths of inlet hose are available in 2, 3, 6, and 9 feet.

  deck with angled connector

Optional Quick Disconnect Deck Kit

To connect freshwater hose on the deck or transom. Includes angled connector for freshwater hose. Faceplate sold separately.

  faceplate with screws

Optional Mounting Kit for Deck Kit (and Remote Switch)

To mount the Quick Disconnect Deck Kit (and Remote Switch Kit). Includes faceplate and screws.


Reverso Standards CE Standard SAE Standard ABYC CE