spacer

Reverso Blog

Keep up with the current news, products and articles from Reverso.

Top Reverso Products from IBEX 2016

Tiffany T. - Thursday, October 13, 2016
top product header

At the show, we presented a wide variety of products that make engine maintenance easier. These are our top 3 products that attendees favored the most.


flushing system image
  Automatic Outboard Flushing System

Flush all outboard motors on a timer. After the single hose connection, press  start, and the system delivers freshwater to each outboard motor–one at a time. More info.
impeller pump image   OP-7 Oil Change Pump

Drain and fill with a lightweight and fast 7 gallon per minute impeller pump. More info.
oil change system image   Oil Change System

Make oil changes cleaner, faster, and easier for the engine, transmission, and generator. Drain oil and fill new oil with the same reversible pump. More info.

Generator Maintenance Tips from GenExpo 2016

Tiffany T. - Monday, July 25, 2016
GenExpo 2016 Products

Preventative maintenance on generators will ensure the engine starts and keeps running when you need reliable power. For prime power or backup, we shared the following tips at GenExpo to practice this maintenance more efficiently and effectively (e.g. diesel cleanliness, servicing filters, oil changes).

1 Automatic Fuel Polishing System


  A fuel polishing system maintains diesel cleanliness in bulk storage tanks, day tanks, and belly tanks. Diesel can begin to degrade after 30 days and can be faster in humid regions, with poor tank housekeeping, areas with unreliable refueling, and if the tank is not kept full. Dirty fuel is picked up by the permanently-installed system, passes the primary and secondary filtration, and the clean diesel is pumped back to the same tank. Optional enclosures are available for outdoor installations. The fuel polishing system will:
  • Ensure diesel in storage is free of water and particulate (i.e. improve fuel quality).
  • Prolong the lifespan of stored diesel (important when kept for backup power).
  • Avoid expensive engine repairs for corrosion and blown injectors.
2 Separ Filter SWK-2000 Series (link directs to Separ Filter site)


  We displayed a demo system of the SWK-2000 fuel water separator. This is the same filtration on the Reverso Automatic Fuel Polishing System. Install this in the fuel system (after the tank) to serve as a pre-filter before the engine. Separ Filter removes 99.9% of water and particulate down to 30 micron, therefore extending the time between maintenance of the engine-mounted filter(s). Separ Filter offers multiple sizes to match the engines' lift pump flow rate.
3 Fuel Primer
 

The electric fuel primer makes priming the fuel system of a diesel engine easier, faster, and safer than manually priming during routine filter changes. It pumps fuel into the lines to purge trapped air in the main feed line, primary filters, secondary filters, and engine. The bypass protects the system from pressurizing beyond the preset. On this pump the user will:

  1. Turn the valve.
  2. Hold down the momentary button to pump until the system is primed
  3. Release the button.
4 Hand Primer
  For smaller generators, or to only prime the filters, a manual hand primer can be installed in the fuel system. Separ Filter manufactures a compact one that pumps 0.85 oz. per stroke.
5 Oil Change Pump for buckets
  Complete faster oil changes with an electric oil change pump, especially if multiple generators are on site. This one is designed to sit on the lid of most 5-gallon buckets. Flip the switch to drain used oil into the bucket, move the hose to the new oil container, flip the switch the other direction to fill, and the job is done.

Spring Cleaning on Oil Change Systems

Tiffany T. - Friday, April 08, 2016

Join us in our Spring Cleaning. Oil change systems are on sale that are designed for twin engines.
Get 50% off while supplies last. Limited quantities are available.

 GPC-3025 oil change system GPC-704 oil change systemGPC-705 oil change system
GPC-3025 Medium Duty

Ideal for recreational and leisure boats.

5-Valve system for:
  • 2 engines
  • 2 transmissions
  • 1 generator




50% Off
GPC-3025, 12V (43-2397)
List Price $695 Sale Price $347.50
GPC-3025, 24V (43-2398) List Price $695 Sale Price $347.50

 

 


GPC-704 and GPC-705 Heavy Duty

Ideal for larger engine sumps and larger vessels.

4 and 5-Valve system for:
  • 2 engines
  • 2 transmissions
  • 1 or no generator


50% Off
GPC-704, 24V (44-2424)
List Price $1125 Sale Price $562.50
GPC-705, 12V (44-2425) List Price $1150 Sale Price $575.00
GPC-705, 24V (44-2426) List Price $1150 Sale Price $575.00


SOLD OUT

See GP-3020 Series

SOLD OUT

See GP-700 Series

 

It's Not A Joke: Get The 5-Valve Oil Change System 50% Off

Tiffany T. - Thursday, March 31, 2016

UPDATE: SOLD OUT. SALE EXPIRED.

Solutions for Priming a Fuel System

Tiffany T. - Monday, March 14, 2016
Author: Jessica Fernandes

Reverso FP-311 fuel primer and oil change system on boat


Because of it's fluid state (yes, pun intended!), it is imperative to filter diesel fuel before it enters the engine on any diesel fuel driven application. Understanding the impacts of fuel that is not properly filtered before it enters the engine is critical to ensuring reliable functionality of an engine and to preventing large, costly repairs.

Preventative maintenance plans are created to ensure filters are clean so they function properly to filter fuel. Why is it, then, that fuel gets poured (albeit a small amount) onto the brand new, clean filters allowing dirty fuel to enter the fuel system after the filtration step as a method of priming the fuel system?

We have an easy solution for you who are responsible for engine reliability, a fuel priming system! A fuel priming system can be used in portable or permanently installed applications. http://reversopumps.com/fuel-primers. The priming system is used to pump fuel from the tank into the fuel system, allowing the fuel to flow through the filtration system as intended. This system also purges air from the fuel lines ensuring proper functionality and preventing damage to the engine.

To take it one step further, add a pre-engine in-line filtration system, boosting the existing filtration system to ensure removal of water and sludge to a level of 2 microns, thus extending the life of your on-engine filtration system and ultimately protecting the engine.
For more information on these solutions, please contact Reverso Pumps at www.reversopumps.com or contact@reversopumps.com.

Original article from: LinkedIn

Reverso Outboard Flushing System Demonstration at FLIBS 2015

Tiffany T. - Monday, November 02, 2015
Fort Lauderdale International Boat Show Logo 2015
Setup for demonstration of Reverso Automatic Outboard Flushing System


Automated Flushing Eliminates the Juggling
Reverso's new Automatic Outboard Flushing System Demonstration will be featured in select booths for an up-close demonstration. While at the Fort Lauderdale International Boat Show, come see the easy and automated operation that will save you the hassle, and what it takes to install one. Find it at the following booths below:

Jerry's Marine Service
Convention Center 2005


Coastline Marine
Bahia Mar/ Hall Of Fame/Las Olas Marina Show 2015
Accessories Tent 11-12



Automated Dry Bilges Eliminates the Odor
Kick it up another knotch for maintenance and see the Arid Bilge System, manufactured by Reverso Pumps. It keeps a clean, dry and cool bilge to ensure the integrity and odor-free experience while boating.

Arid Bilge System, Inc.
Bahia Mar/ Hall Of Fame/Las Olas Marina Show 2015
Equipment Tent 453

Preview the New Outboard Flushing System at IBEX 2015

Tiffany T. - Thursday, August 06, 2015


Be one of the first to preview the new Outboard Flushing System at The International Boatbuilders' Exhibition and Conference (IBEX) 2015. On September 15th - 17th, we will be showcasing it at booth 1411.

The system provides automated flushing for all outboard engines to eliminate slow, manual flushing after a day on the water. It is designed to be permanently mounted for immediate and sequenced flushing.

Click here to download a full description featured in Soundings Trade Only August 2015 issue.

 

Defender's 4th of July Sale: Reverso Fuel Polishing Module

Tiffany T. - Thursday, June 26, 2014

 


UPDATE: SALE EXPIRED
Defender's 4th of July Sale Reverso FPM-150 Fuel Polishing Module

Reverso List Price: $995
Defender Reg. Price: $954.99
Defender Sale Price: $878.59  Buy Now

The only true Fuel Polishing Module available for the do-it-yourself boater to maintain clean diesel fuel. Just add the filter of your choice (not included). Easy to install module consists of a pump, visual/audio alarm and digital timer, and is capable of cleaning a 150 gallon tank in 1 hour.

Compatible with with most standard filters (not for gasoline).

Download Product Information

UPDATE: SALE EXPIRED

Push to Prime - PassageMaker

Tiffany T. - Wednesday, June 25, 2014
Separ Filter's hand priming pump is featured in the Gear Products section of Jul/Aug issue of PassageMaker magazine. Purchase here from Reverso.
Separ Filter Hand Priming Pump The priming lever on most mechanical lift pumps is often very small, sometimes hard to reach and occasionally won't work if the engine's cam is compressing the pump's spring. However, an external priming pump has none of these disadvantages. Some Caterpillar engines are equipped with high-volume plunger pumps that work extremely well, but they are the exception. Reverso, a manufacturer of a variety of marine products including fuel polishing and oil change systems, offers a manual priming pump that's up to the task. The plunger-type device pumps .85 ounces per stroke, and it's equipped with a large red locking collar to secure it when not in use. Working pressure is up to 100psi. Fuel passes through the pump unhindered during normal engine operation, and the pump is certified for use with up to 100 percent biodiesel. It's available in either half-inch female threaded or JIC flare fittings for $85 or $115 respectively. Visit www.reversopumps.com.

Resource
D'Antonio, Steve. "Push to Prime." PassageMaker. Jul. 2014: 36. Print.


  

Throwback Thursday

Tiffany T. - Thursday, December 12, 2013

This oil change system build dates back 12 years! We've made some improvements since then, but good design is timeless! Click here to see the current models we manufacture. Drawing by Gisella Macchiaroli.

reverso oil change system drawing

 

 


Recent Posts


Tags


Archive

RSS

Reverso Standards CE Standard SAE Standard ABYC CE